• Home
  • About us
    • Company Profile
    • Why choose us
    • Quality & HSE
  • All Products
    • Polyacrylamide
    • Flocculant
    • Coagulant
    • Polyaluminium chloride (PAC)
    • CMC
    • Decoloring Agent
    • DRA
    • SAP
  • Application
    • Oilfield
    • Water treatment
    • Mineral processing
    • Paper making
    • Construction
    • Incense making
    • Agriculture
    • Sanitary
  • NEWS
  • Contact
CANCE
 
  • Home
  • About us
    • Company Profile
    • Why choose us
    • Quality & HSE
  • All Products
    • Polyacrylamide
      • Cationic Polyacrylamide
      • Anionic Polyacrylamide
      • Nonionic Polyacrylamide
      • Amphoteric polyacrylamide
    • Flocculant
      • Cationic Flocculant
      • Anionic Flocculant
      • Nonionic Flocculant
      • Amphoteric Flocculant
    • Coagulant
      • Polydadmac
      • Polyamine
    • Polyaluminium chloride (PAC)
      • PAC For Water Treatment
      • PAC For Oilfield
    • CMC
    • Decoloring Agent
    • DRA
    • SAP
  • Application
    • Oilfield
    • Water treatment
    • Mineral processing
    • Paper making
    • Construction
    • Incense making
    • Agriculture
    • Sanitary
  • NEWS
  • Contact

the applicain of anionic polyacrylamide in incense making--ASIAFLOC A73019

the applicain of anionic polyacrylamide in incense making--ASIAFLOC A73019


The product is used as glue powder and adhesive in making incense, suitable for all kinds of incense, such as strip incense, grass incense, pan incense, stick incense, mosquito coil incense, bamboo stick incense, etc. "Asiafloc" polyacrylamide incense making is specially for new and old customers of all factories.

I. Product Overview:

Execution standard: GB/ T139440-92

Molecular weight: 25-27 million

Degree of hydrolysis: 35%

Solid content: ≥90%

The residual of single: 0.05 or less

Appearance: white granule or powder.

For the fragrance factory unique polyacrylamide incense application of high viscosity, burning tasteless, good combustion, high hardness, high finish, soft, easy to use, stable performance, non-toxic harmless to human body, is the most ideal product to do incense. Compared with the traditional process, it can greatly reduce the production cost, which is 3-10 times of the viscosity of traditional elm powder. The finished incense after use has the characteristics of white ash, good folding resistance and strong flexibility.

Two, fragrance with polyacrylamide characteristics:

Usage of polyacrylamide for incense making: no need to add other adhesives, only need to add essence and mosquito repellent.

The Asiafloc adhesive can quickly change the performance of incense billet, greatly improving the quality of incense products. The adhesive has strong adhesion, good cold solubility, and excellent film forming property. Use asiafloc brand of polyacrylamide for incense making to ensure smooth and smooth surface of incense billet, no adhesion, no cracking of the body, and beautiful and delicate appearance of the formed product. Significantly enhance the folding strength of incense, the polyacrylamide asiafloc brand has a long stretch. The asiafloc brand ensures that the incense will not be shaken or broken during transportation. Obviously improve the burning performance of incense. The addition of the adhesive makes the powder particles near the combustion point of the incense head quickly lose water and dry and form a fine microporous structure, which is filled with air to improve the flammability. Following the trend of green consumption, the asiafloc brand of polyacrylamide is completely different from the special chemical smell of ordinary adhesives.

Because of its cold solubility, the Asiafloc brand of polyacrylamide can be mixed in warm or cold water at any temperature. Even in low temperature, it can save the cooking process, reduce energy consumption and simplify the process. In addition, the asiafloc brand incense polyacrylamide has strong adsorption capacity.

The asiafloc brand can be used in the market to replace wood glue, elm peel powder, root powder and adhesive, and the usage of this kind of adhesive is half of that of ordinary adhesive. This can not only save raw material consumption and procurement, quality inspection and other procedures, but also reduce the process and equipment, to the greatest extent to save manpower and material resources.

Iii. Method of use and precautions:

1. Determine the best model and the best dosage of the product through small test.

2, the product is prepared into 0.1% (solid content) concentration of aqueous solution, neutral water without salt is appropriate.

3. When dissolving water, evenly sprinkle the product into stirred water and increase temperature appropriately (<60℃) to accelerate into solution.

4, solid products are packed in polypropylene woven bags, lined with plastic bags, each bag 25kg, plastic body packed in plastic barrels, lined with plastic bags, each 50kg or 200kg.

5, this product has hygroscopic, should be sealed in a cool and dry place, the temperature should be below 35℃.

6, solid products to avoid sprinkle on the ground, in order to prevent the product moisture after slippery.

7, preparation of PAM aqueous solution, should be carried out in enamel, galvanized, aluminum or plastic bucket, not in iron container preparation and storage.

8. When dissolving, attention should be paid to adding the product evenly and slowly into the dissolver with stirring and heating measures. Consolidation should be avoided. Recommended agitator 60-200 RPM /min, otherwise it will lead to polymer degradation, shadow

9, PAM aqueous solution should be used now, when the solution is placed for a long time, its performance will gradually reduce depending on the water quality.

Iv. Packaging and storage:

This product is non-toxic, pay attention to moistureproof, rain proof, avoid sun exposure. Storage life: 2 years,25kg paper bags (lined plastic bags and pasted kraft paper bags).


ASIAFLOC

ASIAFLOC is nationally recognized in China as being a high-tech company that provides high quality products and competitive pricing. Over the past 16 years, we have focused our efforts on improving our products through R&D,a full range of product series have been completed,including cationic polyacrylamide ,anionic polyacrylamide ,nonionic polyacrylamide,amphoteric polyacrylamide total over 200 different models.

Please feel free to contact our technical team for more.

Search

QINGDAO OFFICE
A1401,YIHE TOP INTERNATIONAL, NO.10 HONGKONG MIDDLE ROAD , QINGDAO,SHANDONG,CHINA

Tél.  +86 (0532) 55768816
Fax.  +86 (0532) 55768816

Email: INFO@CHINAFLOC.COM


  • LinkedIn

© Copyright 2005-2023. All Rights Reserved │About Us │Application │Contact

Friends links:Optical Brightener OB , Ammonium Nitrate factory ,Anionic polyacrylamide, Private label candles , Candle manufacturers, Pullulan manufacturer,