A leading manufacturer in polyacrylamide (PAM) manufacturing
ASIAFLOC Chemical

Anionic polyacrylamide (Praestol A 3040 L Praestol A 3075 L) can be replaced by ASIAFLOC A1012 and A3016

Color
white powder
Application
water treatment
Certificate
iso9001
Place of Origin
china
Other Names
flocculant
CAS No
9003-05-8
Brand Name
chinafloc

Praestol A 3075 L is two anionic polyacrylamides with different degree of hydrolysis and molecular weight. Praestol A 3075 L is mainly used in mineral processing and water treatment. The ASIAFLOC A1012 and ASIAFLOC A3016 can be completely replaced and have good application effect.

Anionic polyacrylamide (Praestol A 3040 L Praestol A 3075 L) can be replaced by ASIAFLOC A1012 and A3016


Praestol A 3075 L is two anionic polyacrylamides with different degree of hydrolysis and molecular weight. Praestol A 3075 L is mainly used in mineral processing and water treatment. The ASIAFLOC A1012 and ASIAFLOC A3016 can be completely replaced and have good application effect.


Product Overview:


Anionic polyacrylamide (APAM) is a water-soluble linear polymer synthesized by high degree of polymerization. Supplied in a fine granular state or colloidal form free of dust and flakes, completely soluble in water and rapidly soluble due to its micropellet form. Different types of polyacrylamide have different active groups, can make different suspended particles flocculation, easy to filter, separation. Polyacrylamide is almost insoluble in any organic solvent and is largely soluble in water. It is widely used in many industries, such as flocculation, thickening, bonding, scale inhibition, colloid stabilization, resistance reduction, film formation, gel and biological materials. Our anionic polyacrylamide PAM appearance are white dry powder or particles, effective PH range of 7-14, according to different uses is divided into two production processes, a homopolymer (non-ionic polyacrylamide pre-hydrolysis), a copolymer (acrylamide and acrylic acid or sodium acrylic acid).


Main uses:


1, industrial wastewater treatment: for suspended particles, coarse, high concentration, particles with positive charge, PH value of water neutral or alkaline sewage, steel mill wastewater, electroplating plant wastewater, metallurgical wastewater, coal washing wastewater and other sewage treatment, the effect is good.


2, sand washing sewage treatment: treatment mechanism sand sewage, cobblestone, mountain sand, river sand, mountain material, wind fossil and other raw materials sand sewage treatment, belt filter press and plate and frame filter mud dry drainage.


3, starch factory and distillery loss of starch wine tank recovery: now many starch factory wastewater contains a lot of starch. Anionic polyacrylamide is now added to make starch particles flocculate precipitation, and then the sediment by pressure filtration into cake, can be used as feed. Cationic dehydration and press filtration can also be used in distilleries.


4. Treatment of coal washing wastewater.


5, paper additives: anionic polyacrylamide (PAM) in the paper industry to burn alkali clarification, fiber dispersant, can improve the beating degree, filler retention agent, paper strengthening agent, can be used to improve water filtration rate and water recovery. Adding trace PAM-03 anionic polyacrylamide into the pump-port pulp-storage tank before paper making can increase the retention of water fillers and fine fibers on the net by 20-30%. Each ton can save pulp 20-30kg.


6, oil field three recovery oil displacement agent: anionic polyacrylamide can adjust the rheological properties of injected water, increase the viscosity of driving liquid, improve water flooding sweep efficiency, reduce the permeability of water phase in the formation, so that water and oil can flow forward uniformly. Its role in oil exploitation is mainly used for three oil recovery in the oil field, each injection of a ton of polymer polyacrylamide products, can be more than 100-150 tons of crude oil


7, drilling mud material: in the oil field exploration and development and geology, water conservancy, coal exploration, anionic polyacrylamide used as drilling mud material additives, can increase the service life of drill bit, improve drilling speed and footage, reduce the blockage of drilling, anti well collapse effect is obvious. Fracturing fluid of polyacrylamide oil field and water plugging agent for profile control and water plugging.


Technical indicators:


Product Name Appearance Solid content molecular weight dissolution rate water insoluble

Anionic polyacrylamide white particles ≥90% 6-20 million ≤60 points ≤0.02%

Packing and storage instructions:


1, the product is packed in two kinds of woven bags lined with double layer polyethylene plastic bags, or pasted plastic kraft paper, each bag net weight of 25kg


2, in storage and transportation, pay attention to heat, moisture, dry powder products exposed for a long time will absorb moisture agglomerate.


3. Stacking layers shall not exceed 20 layers, and the effective storage period is 2 years.


If you want to ask anything just fill in the form below and send us. We will contact you within 12 hours.

Write a review

FEATURED PRODUCTS

20 million molecular weight anionic polyacrylamide(magnafloc 511)--chinafloc
20 million molecular weight anionic polyacrylamide(magnafloc 511)--chinafloc

20 million molecular weight anionic polyacrylamide product price in 13,000 yuan/ton, the higher the molecular weight of ...

More >>
The anionic emulsion polyacrylamide (Magnafloc 110L) can be replaced by a CHINAFLOC EM73018
The anionic emulsion polyacrylamide (Magnafloc 110L) can be replaced by a CHINAFLOC EM73018


Magnafloc 110L is a anionic polyacrylamide emulsion with a high molecular weight. Mainly used in the field of water tr...

More >>
The anionic polyacrylamide (magnafloc 155,156) can be replaced by  ASIAFLOC A2520 and ASIAFLOC 2015
The anionic polyacrylamide (magnafloc 155,156) can be replaced by ASIAFLOC A2520 and ASIAFLOC 2015

Magnafloc 155 and Magnafloc 156 are two high and moderately molecular weight anionic polyacrylamide flocculantsupplied a...

More >>
Anionic polyacrylamide emulsion (Flopam EM430,EM533) can be replaced by a CHINAFLOC EM1018 EM3018
Anionic polyacrylamide emulsion (Flopam EM430,EM533) can be replaced by a CHINAFLOC EM1018 EM3018

Flopam EM430,EM635 These two anionic polyacrylamide emulsions from SNF, respectively have 30% and 50% hydrolysis degree ...

More >>