A leading manufacturer in polyacrylamide (PAM) manufacturing
ASIAFLOC Chemical

Application of polyacrylamide (FLOPAM AN913 AN923 AN956)

mainly used as flocculant: for suspended particles, coarse, high concentration, particles with positive charge, water PH value of neutral or alkaline sewage, due to anionic polyacrylamide molecular chain contains a certain amount of polar base can absorb suspended solid particles in water, so that the formation of large flocculant bridging between particles. Therefore, it accelerates the sedimentation of particles in suspension, accelerates the clarification of solution and promotes filtration. The product is widely used in chemical industry waste water, waste liquid treatment, municipal sewage treatment. Tap water industry, high turbidity water purification, sedimentation, coal washing, mineral processing, metallurgy, iron and steel industry, zinc, aluminum processing industry, electronic industry and other water treatment.

Application of polyacrylamide (FLOPAM AN913 AN923 AN956)


Anionic polyacrylamide

1, mainly used as flocculant: for suspended particles, coarse, high concentration, particles with positive charge, water PH value of neutral or alkaline sewage, due to anionic polyacrylamide molecular chain contains a certain amount of polar base can absorb suspended solid particles in water, so that the formation of large flocculant bridging between particles. Therefore, it accelerates the sedimentation of particles in suspension, accelerates the clarification of solution and promotes filtration. The product is widely used in chemical industry waste water, waste liquid treatment, municipal sewage treatment. Tap water industry, high turbidity water purification, sedimentation, coal washing, mineral processing, metallurgy, iron and steel industry, zinc, aluminum processing industry, electronic industry and other water treatment. 2, used in the petroleum industry, oil recovery, drilling mud, waste mud treatment, prevent water channelling, reduce friction, improve oil recovery, three oil recovery has been widely used. 3, used for textile sizing agent, slurry stable performance, less falling pulp, fabric breakage rate is low, clean cloth. 4, for paper industry, one is to improve the retention rate of filler, pigment, etc. To reduce the loss of raw materials and environmental pollution; Two is to improve the strength of the paper (including dry strength and wet strength), in addition, the use of PAM can also improve the tear resistance and porosity of the paper, to improve the visual and printing performance, but also used in food and tea wrapping paper. 5, other industries, food industry, used for sugar cane sugar, sugar beet sugar production sugar juice clarification and syrup phosphorus float extraction. Enzyme preparation fermented liquid flocculation clarifying industry, also used in feed protein recovery, stable quality, good performance, recovery of protein powder to chickens and raising the survival rate of weight gain, no adverse effects of egg production, synthetic resin coating, civil water plugging grouting materials, building materials industry, improve the quality of cement, construction adhesive, caulking repair and plugging agent, soil improvement, electroplating industry, printing and dyeing, etc.

Cationic polyacrylamide (CPAM) product characteristics: the appearance of cationic polyacrylamide (CPAM) is white powder, ion from 20% to 55% water solubility, can be dissolved in water in any proportion and insoluble in organic solvents. High polymer electrolyte, suitable for wastewater treatment with negative charge and rich organic matter. Suitable for dyeing, papermaking, food, construction, metallurgy, mineral processing, coal powder, oil field, aquatic processing and fermentation industries with higher organic colloid content of wastewater treatment, especially for municipal sewage, municipal sludge, papermaking sludge and other industrial sludge dewatering treatment.

Cationic polyacrylamide (CPAM) is mainly used

1) Used for sludge dewatering according to the nature of sludge can choose the corresponding brand of the product, can effectively in the sludge into the pressure filter before sludge dewatering, dehydration, flocculation, non-stick filter cloth, pressure filter is not scattered, flow mud cake thick, dehydration efficiency is high, mud cake moisture content is below 80%.

2) Used for the treatment of domestic sewage and organic wastewater, the product in the compatibility or alkaline media are positive, so the sewage suspended particles with negative charge for flocculation precipitation, clarification is very effective. Such as the production of grain alcohol wastewater, papermaking wastewater, waste water of urban sewage treatment plant, beer wastewater, gourmet powder factory wastewater, sugar water, high organic content Waste water, waste water feed, textile printing and dyeing wastewater, etc., with cationic polyacrylamide than with anionic, nonionic polyacrylamide or inorganic salts effect is several times or tens times higher, because this kind of wastewater with negatively charged.

3) Used for the treatment of tap water with river water as the source of flocculant, less dosage, good effect, low cost, especially with inorganic flocculant compound use effect is better, it will become the treatment of the Yangtze River, Yellow River and other watershed of the tap water plant efficient flocculant.

4) Strengthening agent and other auxiliaries for paper making.

5) Used as oil field economic AIDS, such as clay anti-swelling agent, oil field acidification with thickening agent.

Cationic polyacrylamide (CPAM) packaging and storage

This product is non-toxic, pay attention to moistureproof, rain proof, avoid sun exposure. Storage life: 2 years,25kg paper bags (lined plastic bags and pasted kraft paper bags).


Nonionic polyacrylamide

[Product Application]

1, mainly used as flocculant: because its molecular chain contains a certain amount of polar genes can absorb suspended solid particles in water, so that the formation of large flocculant between particles. It accelerates the sedimentation of particles in suspension, has very obvious effects of accelerating the clarification of solution, promoting filtration and so on. It is widely used in the treatment of chemical industrial wastewater, waste liquid, municipal sewage treatment. Especially when the sewage is acidic, using this product is the most suitable. It can be used with inorganic flocculants such as poly-iron and poly-aluminum.

2, used in the petroleum industry, oil recovery, drilling mud, waste mud treatment, prevent water channelling, reduce friction, improve oil recovery, three oil recovery has been widely used.

3, used for textile sizing agent, slurry stable performance, less falling pulp, fabric breakage rate is low, clean cloth.

4, for paper industry, one is to improve the retention rate of filler, pigment, etc. To reduce the loss of raw materials and environmental pollution; Two is to improve the strength of the paper (including dry strength and wet strength), in addition, the use of PAM can also improve the tear resistance and porosity of the paper, to improve the visual and printing performance, but also used in food and tea wrapping paper.

5, other industries, food industry, used for sugar cane sugar, sugar beet sugar production sugar juice clarification and syrup phosphorus float extraction. Enzyme preparation fermented liquid flocculation clarifying industry, also used in feed protein recovery, stable quality, good performance, recovery of protein powder to chickens and raising the survival rate of weight gain, no adverse effects of egg production, synthetic resin coating, civil water plugging grouting materials, building materials industry, improve the quality of cement, construction adhesive, caulking repair and plugging agent, soil improvement, electroplating industry, printing and dyeing, etc.

Global consumption of polyacrylamide


If you want to ask anything just fill in the form below and send us. We will contact you within 12 hours.

Write a review

FEATURED PRODUCTS

20 million molecular weight anionic polyacrylamide(magnafloc 511)--chinafloc
20 million molecular weight anionic polyacrylamide(magnafloc 511)--chinafloc

20 million molecular weight anionic polyacrylamide product price in 13,000 yuan/ton, the higher the molecular weight of ...

More >>
The anionic emulsion polyacrylamide (Magnafloc 110L) can be replaced by a CHINAFLOC EM73018
The anionic emulsion polyacrylamide (Magnafloc 110L) can be replaced by a CHINAFLOC EM73018


Magnafloc 110L is a anionic polyacrylamide emulsion with a high molecular weight. Mainly used in the field of water tr...

More >>
The anionic polyacrylamide (magnafloc 155,156) can be replaced by  ASIAFLOC A2520 and ASIAFLOC 2015
The anionic polyacrylamide (magnafloc 155,156) can be replaced by ASIAFLOC A2520 and ASIAFLOC 2015

Magnafloc 155 and Magnafloc 156 are two high and moderately molecular weight anionic polyacrylamide flocculantsupplied a...

More >>
Anionic polyacrylamide emulsion (Flopam EM430,EM533) can be replaced by a CHINAFLOC EM1018 EM3018
Anionic polyacrylamide emulsion (Flopam EM430,EM533) can be replaced by a CHINAFLOC EM1018 EM3018

Flopam EM430,EM635 These two anionic polyacrylamide emulsions from SNF, respectively have 30% and 50% hydrolysis degree ...

More >>