Superfloc C-498 cationic polyacrylamide can be replaced by Asiafloc C6008

Polyacrylamide classification polyacrylamide product introduction: polyacrylamide (PAM) is a water-soluble polymer, insoluble in most organic solvents, has good flocculation, can reduce the friction resistance between the liquid, according to the ionic characteristics can be divided into non-ionic, anion, cation and amphoteric type four types. PAM is a water-soluble polymer, insoluble in most organic solvents, has good flocculation, can reduce the friction resistance between the liquid, according to the ionic characteristics can be divided into non-ionic, anion, cation and amphoteric type four types.

Anionic polyacrylamide (APAM) main uses:

Industrial wastewater treatment: for suspended particles, relatively high concentration, particles with positive charge, PH value of water neutral or alkaline sewage, iron and steel plant wastewater, electroplating plant wastewater, metallurgical wastewater, coal washing wastewater and other sewage treatment, the best effect.

Cationic polyacrylamide (CPAM) main uses:

1) Used for sludge dewatering according to the nature of sludge can choose the corresponding brand of the product, can effectively in the sludge into the pressure filter before sludge dewatering, dehydration, flocculation, non-stick filter cloth, pressure filter is not scattered, flow mud cake thick, dehydration efficiency is high, mud cake moisture content is below 80%.

2) Used for the treatment of domestic sewage and organic wastewater, the product in the compatibility or alkaline media are positive, so the sewage suspended particles with negative charge for flocculation precipitation, clarification is very effective. Such as the production of grain alcohol wastewater, papermaking wastewater, waste water of urban sewage treatment plant, beer wastewater, gourmet powder factory wastewater, sugar water, high organic content Waste water, waste water feed, textile printing and dyeing wastewater, etc., with cationic polyacrylamide than with anionic, nonionic polyacrylamide or inorganic salts effect is several times or tens times higher, because this kind of wastewater with negatively charged.

3) Used for the treatment of tap water with river water as the source of flocculant, less dosage, good effect, low cost, especially with inorganic flocculant compound use effect is better, it will become the treatment of the Yangtze River, Yellow River and other watershed of the tap water plant efficient flocculant.

4) Strengthening agent and other auxiliaries for paper making.

5) Used as oil field economic AIDS, such as clay anti-swelling agent, oil field acidification with thickening agent.

Cationic polyacrylamide (CPAM) packaging and storage:

This product is non-toxic, pay attention to moistureproof, rain proof, avoid sun exposure. Storage life: 2 years,25kg paper bags (lined plastic bags and pasted kraft paper bags).