The non-ionic polyacrylamide (Magnafloc 333) can be replaced by ASIAFLOC N0510

Product introduction

Non-ionic polyacrylamide N series products contain a certain amount of polar genes in the molecular chain can absorb suspended solid particles in water, so that the formation of large flocculation between particles. It accelerates the sedimentation of particles in suspension, has very obvious effects of accelerating the clarification of solution, promoting filtration and so on. It is widely used in the treatment of chemical industrial wastewater, waste liquid, municipal sewage treatment. Especially when the sewage is weak acid, it is suitable to use this product.

Product features

Product Introduction:

Non-ionic polyacrylamide N series products contain a certain amount of polar genes in the molecular chain can absorb suspended solid particles in water, so that the formation of large flocculation between particles. It accelerates the sedimentation of particles in suspension, has very obvious effects of accelerating the clarification of solution, promoting filtration and so on. It is widely used in the treatment of chemical industrial wastewater, waste liquid, municipal sewage treatment. Especially when the sewage is weak acid, it is suitable to use this product.

Product features:

1, water solubility is good, can also dissolve in cold water.

2, flocs close, less dosage.

3. High clarity of water after treatment.

4. Good compatibility with inorganic coagulant.

Product efficacy:

1. Clarification and purification effect;

2. Settlement promotion;

3. Promoting effect of filtration;

4, thickening and other effects.

Application industry:

1, mainly used for modifying polyacrylamide basic raw materials. Such as anionic polyacrylamide, according to the use of different grades of non-ionic polyacrylamide as basic raw materials for hydrolysis.

2, textile industry additives, adding some other chemicals can be prepared into chemical sizing, used for textile sizing, can improve adhesion, permeability and desizing performance, so that textiles have anti-static, reduce sizing rate, reduce pulp spot, cloth machine broken and falling.

3, can be used as sewage treatment agent, when the sewage acidic suspension using non-ionic polyacrylamide, for flocculation is appropriate, then the non-ion is adsorption bridge, so that the suspended particles produce flocculation precipitation. To achieve the purpose of purifying water, can also be used for water treatment, especially with inorganic flocculant, so that the water treatment effect is good.

4, the non-ionic polyacrylamide solution to add crosslinking agent, spraying on the desert, curing film can prevent sand, sand fixation, in the desert, is a very important method. Non-ionic hygroscopic properties are very strong, it can retain soil moisture, in arid areas, using NPAM for soil improvement is a good measure.

5, non-ionic polyacrylamide and lignocellulose, plus some chemical additives, available oilfield profile control water plugging agent.

6, can be used for construction, construction glue, interior wall coating and so on. It can be used as a chemical grouting agent for water plugging of dam, foundation and tunnel with 9.5 PAM and 0.5 NN.

Packaging and storage:

Use 25Kg plastic lining woven bag or paper plastic composite bag packaging, also according to user requirements packaging. When storing and transporting, pay attention to prevent heat and moisture to prevent package damage. Dry powder products will absorb moisture and agglomerate when exposed for a long time. Stacking layers shall not exceed 20 layers. Effective storage life is 2 years.