Cationic polyacrylamide of FO4190 FO4290 FO4350 can be replaced by ASIAFLOC C series

FO4190 FO4290 FO4350 are Cationic polyacrylamide of which with 15%,30% and 45% charge . they are can be used for different lines for water treatment ,sludge dewatering  and other applications.

The application:

(1) cationic polyacrylamide flocculant is mainly used in industrial solid-liquid separation process, including sedimentation, clarification, concentration and sludge dehydration. The main industries used are urban sewage treatment, paper industry, food processing industry, petrochemical industry, metallurgy industry, mineral processing industry, printing and dyeing industry, sugar industry and various industries of wastewater treatment. It is used for municipal sewage and meat, poultry and food processing wastewater treatment process of sludge precipitation and sludge dehydration, by neutralizing sludge with negative charged organic colloid with positive charged groups and polymer excellent bridging and condensation function, promote colloidal particles gathered into large flocculates and its suspension separation. The effect is obvious and the dosage is small.we recommend the models of ASIAFLOC C80510,ASIAFLOC C81012,ASIAFLOC C82012.

(2) cationic polyacrylamide can be used as paper dry strength agent, retention agent and filter aid in the paper industry, which can greatly improve the quality of paper, save cost and improve the production capacity of paper mill. It can be directly used as an electrostatic bridge between inorganic salt ions, fibers and other organic polymers, so as to improve the physical strength of paper, reduce the loss of fibers or fillers, accelerate water filtration, and play the role of strengthening, retention and filtration. It can also be used for white water treatment, while in the deinking process plays an obvious flocculation.we recommend the models of ASIAFLOC C83012.

(3) Cationic polyacrylic fiber pulp (asbestos cement products) can improve the drainage performance of molded asbestos cement products, improve the strength of asbestos sheet; In insulation boards, the adhesion between the additive and the fiber can be improved.we recommend the models of ASIAFLOC C82012.

(4) Cationic polyacrylamide can be used as the clarifier of mine wastewater and coal washing wastewater.we recommend the models of ASIAFLOC C83012.

(5) cationic polyacrylamide can be used for the treatment of printing and dyeing wastewater, leather wastewater and oil wastewater, removal of turbidity and decolorization, to meet the discharge standard.we recommend the models of ASIAFLOC C85008.

(6) Cationic polyacrylamide is helpful to the separation of gypsum in wet-process phosphoric acid process.we recommend the models of ASIAFLOC C84008.

(7) cationic polyacrylamide as a flocculant for the water treatment of the river as the water source.

(8) cationic polyacrylamide powder cationic polyacrylamide is often used in sewage treatment of organic wastewater: usually, sewage with suspended particles of negative charge of sewage is flocculated precipitation. Depending on the cationic acid or alkaline medium in the flocculating unit, it is very effective to use electronegativity to quickly clarify the wastewater. In addition to powdered polyacrylamide, polyaluminum chloride and anionic polyacrylamide moulding products are widely used in organic wastewater treatment.

(9) cationic polyacrylamide for alcohol factory, brewery, monosodium glutamate factory, sugar factory, meat products factory, beverage factory, textile printing and dyeing factory and various sewage treatment plant waste water. It contains a variety of organic solvents, inorganic and organic sulfides, hydrocarbons, chlorine, oil, mercury and other environmentally harmful components and can be flocculated with polyacrylamide prior to discharge. In textile printing and dyeing process can also be used as mud treatment agent, selective water blocking agent, water thickening agent, softener, antistatic agent and general disinfectant.

(10) cationic polyacrylamide for water purification, oil and water system demulsibility, oil wastewater treatment, wastewater recovery and sludge dehydration; Polyacrylamide can effectively reduce the friction of the fluid, adding a small amount of polyacrylamide in water can reduce friction by 50-80%

At present, there are still many problems in industrial wastewater treatment in China, which are more difficult to control due to the diversity of industrial wastewater network. The difficulty is chemical oxygen demand in the water. Because these COD levels are difficult to degrade, the treated water's COD levels remain above national and local discharge standards. At present, the main method of degrading Chinese water is chemical oxygen demand removal, i.e. removal of CHEMICAL oxygen demand from water by appropriate chemical methods. At present, POLYaluminium chloride and filling stations, as two flocculants, have a very preliminary treatment capacity with a COD removal rate of about 30%. The value of pollutants, the preparation and production of special super flocculants and the test of many projects are far higher than the traditional flocculants, which can save a lot of enterprise costs. The commonly used flocculants include polyaluminum chloride PAC, polyacrylamide PAM and other water purification flocculants. The wastewater was decolorized by polyaluminum chloride, and the boD/BOD value of the treated water increased significantly. After treatment, the boD/BOD value of the treated water is greatly increased, heavy metals in the wastewater are removed, the biodegradability of the wastewater is improved, and phosphorus and sulfide are removed.